_______________________
Acutus Turntable
Acutus turntable is
radically different from current design theories. Designed from
a clean sheet, leaving nothing unexplored or unresolved. Setting
a standard of musical reproduction others aspire to achieve. In
brief, this is a belt drive, sprung subchassis design and this
is where similarity with other designs stops. On first
appearance you can see there is something different and you
would be right.
Vibration caused by the stylus during playback is transmitted to
the subchassis directly through the bearing and not absorbed
into the platter. This is achieved using a unique matting
material and clamping system. External vibrations are isolated
by a unique suspension system, now conveniently adjustable from
above. A purpose designed power supply coupled to a unique hand
made motor, 10 times more powerful than normally used, drive a
massive 10Kg platter. Recently improvements to the suspension,
now allows adjustments from above, making set-up easier.
Also the out-board power supply has a cosmetic facelift with
universal approval.
Stunningly finished in Polished Chrome or special order plated
Gold, this product is the natural choice of equipment for those
who demand the best. We can also supply and fit virtually any arm and cartridge of your
choice.
Drive |
: Belt
drive |
Speeds |
: 33.3 and
45.0 RPM |
Platter
mass |
: 10.0 Kg |
Bearing |
: Inverted
stainless steel |
Thrust
point |
: Tunsten
carbide/Sapphire |
Suspension |
: 3 point,
springs in vertical, o-rings in lateral frequency |
|
: vertical
2.5 Hz (variable), lateral 4.5 Hz |
Tonearms
|
: Std. cut
for SME (adapters to order) |
Motor
|
: Hand
built 24v 140mNm ac synchronous |
Power
supply |
: Separate
control unit |
Voltage
input |
:
100-240vac 50/60Hz 20 watts max. (depending on region) |
Dimensions
|
: Turntable
(overall) 460 x 400 x 210mm (WxDxH) |
Dimensions
|
: Turntable
(footprint) 410 x 360mm (WxD) |
|
: P.S.U.
250 x 215 x 95mm (WxDxH) |
Net weight |
: 19.0Kg
(42lb) turntable only |
|
: 3.5Kg
(8lb) psu only |
Packaging
|
: 550 x 500
x 550mm (WxDxH) |
Shipping
weight |
: 30.0Kg
(66lb) |
_______________________
Acutus Reference
Turntable
Twenty years in
development and ten years in unchanged production the Acutus
offered one of the pinnacles of vinyl reproduction. Many
companies claim to improve their products, however in reality,
they are merely changes rather than a leap forward in
reproduction. When we make an improvement, it must be easily
discernable within seconds and to everyone, not just the trained
ears of this world. So how did we improve on the best? The motor
unit remains unchanged but for an improvement to the suspension,
which allows easier adjustment from above the unit. The
transformation has been in the power supply. Three years in
development, the Acutus Reference Power Supply has elevated the
performance of the Acutus to superlative levels, even leaving
experienced listeners of the Acutus in disbelief. Everything has
improved, bass and treble extension, lower noise floor, detail
and control. Soundstage, dynamics and shear realism. Once again
we have raised the bar that others must reach. Existing Acutus'
with the standard psu can easily be upgraded.
The cost? Few will be able to enjoy the performance of the
Reference, but those lucky enough will just smile. We can also supply
and fit virtually any arm and cartridge of your
choice.
Drive |
:
Belt drive |
Speeds |
:
33.3 and 45.0 RPM |
Platter mass |
:
10.0 Kg |
Bearing |
:
Inverted stainless steel |
Thrust point |
:
Tunsten carbide/Sapphire |
Suspension |
: 3
point, springs in vertical, o-rings in lateral
frequency |
|
:
vertical 2.5 Hz (variable), lateral 4.5 Hz |
Tonearms |
:
Std. cut for SME (adapters to order) |
Motor |
:
Hand built 24v 140mNm ac synchronous |
Power supply |
:
Separate control unit |
Voltage input |
:
100-240vac 50/60Hz 300 watts max. (depending on
region) |
Dimensions |
:
Turntable (overall) 460 x 400 x 210mm (WxDxH) |
Dimensions |
:
Turntable (footprint) 410 x 360mm (WxD) |
|
:
P.S.U. 415 x 350 x 140mm (WxDxH) |
Net
weight |
:
19.0Kg (42lb) turntable only |
|
:
20.1Kg (45lb) psu only |
Packaging |
:
(box1) 550 x 500 x 550mm (WxDxH) |
|
:
(box2) 710 x 490 x 270mm (WxDxH) |
Shipping weight |
:
55.0Kg (122lb) |
|
_______________________
Diva II
Turntable
Despite
being their entry level model, the Diva II shares the design
philosophy and key elements of Diva's more expensive designs.
Mechanical energy transmission away from the record, high torque
motors and isolation is a Diva philosophy with high
standards of engineering and design.
The foundation of the Diva II is the same ultra rigid, one piece
aluminium casting used for their more expensive models. The arm
and platter are mounted to this using the same sapphire bearing
and clamping system as their other turntables. The vibration
caused by the cartridge during replay is effectively channelled
to this main chassis. Platter construction is MDF with the same
mat as the Volvere and Sequel models, ensuring an impedance
miss-match with the record and with the aid of the clamp
reducing energy entering the platter thus avoiding sound
colourations.
Isolating the main chassis is critical to ensure low colouration
and here Diva have employed a triple elastomer layer system
using their uniquely tailored sorbathane compound as used in
their Isolating Support Platform; this gives optimum mechanical
isolation of the playing surface, resulting in better
information retrieval and resolution.
The external power supply feeds a powerful motor to give
excellent speed stability and dynamic sound.
Beautifully finished with minimalist styling, a timeless piece
of engineering excellence and design within the reach of
everyone.
Specifications
Drive : Belt drive
Speeds : 33.3 and 45.0 RPM
Platter mass : 2.5 Kg
Bearing : Inverted stainless steel
Thrust point : Tungsten carbide/Sapphire
Suspension : Triple layer 3 point elastomer
Tonearms : Std. cut for Linn (adapters to order)
Motor : 24v 12mNm ac synchronous
Power supply : Separate control unit
Voltage input : 100-240vac 50/60Hz 20 watts max
Dimensions : Turntable (overall) 450mm x 390mm x 140mm (WxDxH)
Dimensions : Turntable (footprint) 380mm x 340mm (WxD)
P.S.U. 158mm x 160mm x 60mm (WxDxH)
Net weight : 6.4Kg (14lb) ex. PSU
Packaging : 560mm x 535mm x 240mm (WxDxH)
Shipping weight : 10.0Kg (22lb)
The dust cover shown here is
available separately
_______________________
Volvere
Turntable S4
The Volvere
turntable uses many of the unique design elements of the
much-acclaimed Acutus turntable at an affordable price. In brief
this is a belt drive, sprung subchassis design. Built to the
same engineering standard as the Acutus turntable and
incorporating a similar clamping, bearing and suspension design.
Vibration caused by the stylus during playback is transmitted to
the subchassis directly through the main bearing and not
absorbed into the platter. This is achieved using a unique
matting material and clamping system. External vibrations are
isolated by the unique AVID suspension system.
Recently the Volvere has been revised into the Series 4.
Improvements over previous versions include improved vertical
suspension with integrated lateral isolation bands, full
stainless steel bearing like Acutus, thicker platter, some 40%
heavier and cosmetic improvements to the feet and clamp.
Stunningly finished in Satin Silver or Black, this product is
the natural choice for the discerning vinyl enthusiast. We can also supply
and fit virtually any arm and cartridge of your
choice.
Drive |
: Belt
drive |
Speeds |
: 33.3 and
45.0 RPM |
Platter
mass |
: 6.7 Kg |
Bearing |
: Inverted
stainless steel |
Thrust
point |
: Tunsten
carbide/Sapphire |
Suspension |
: 3 point,
springs in vertical, o-rings in lateral frequency |
|
: vertical
3.2 Hz (variable), lateral 4.5 Hz |
Tonearms
|
: Std. cut
for SME (adapters to order) |
Motor
|
: Modified
24v 55mNm ac synchronous |
Power
supply |
: Separate
control unit |
Voltage
input |
:
100-240vac 50/60Hz 20 watts max. (depending on region) |
Dimensions
|
: Turntable
(overall) 425 x 370 x 205mm (WxDxH) |
Dimensions
|
: Turntable
(footprint) 375 x 325mm (WxD) |
Net weight |
: 12.3Kg
(27lb) |
Packaging
|
: 450 x 480
x 500mm (WxDxH) |
Shipping
weight |
: 18.5Kg
(41lb) |
_______________________
Volvere Sequel
Turntable S2
Sequel, use's
technology from the Acutus within the framework of the Volvere
and recently improved suspension, bearing, platter and cosmetic
changes makes this a class leading package. Incorporating the
power supply and motor from the Acutus the improvement in sound
quality is instantly noticeable over the Volvere. Improved
dynamics, imaging and information retrieval brings you closer
than ever to the performance of the Acutus. Extended frequency
extremes, especially in the lower registers again make this a
class-leading product. We can also supply and fit virtually any arm and cartridge of your
choice.
Price £4,600.00
Drive |
: Belt
drive |
Speeds |
: 33.3 and
45.0 RPM |
Platter
mass |
: 6.7 Kg |
Bearing |
: Inverted
stainless steel |
Thrust
point |
: Tunsten
carbide/Sapphire |
Suspension |
: 3 point,
springs in vertical, o-rings in lateral frequency |
|
: vertical
3.2 Hz (variable), lateral 4.5 Hz |
Tonearms
|
: Std. cut
for SME (adapters to order) |
Motor
|
: Modified
24v 140mNm ac synchronous |
Power
supply |
: Separate
control unit |
Voltage
input |
:
100-240vac 50/60Hz 20 watts max. (depending on region) |
Dimensions
|
: Turntable
(overall) 425 x 370 x 205mm (WxDxH) |
Dimensions
|
: Turntable
(footprint) 375 x 325mm (WxD) |
|
: P.S.U.
250 x 215 x 95mm (WxDxH) |
Net weight |
: 12.3Kg
(27lb) turntable only |
|
: 3.5Kg
(8lb) psu only |
Packaging
|
: 450 x 480
x 500mm (WxDxH) |
Shipping
weight |
: 20.0Kg
(44lb) |
_______________________
|