|
Lux Corporation, founded in 1925, has changed its company name
to e-Lux Corporation with a new management organization to meet
the changing world of our information society. At the same time,
a new company has been established under the name of Luxman
Corporation, to succeed to the traditional Luxman audio brand
that has grown together with the development of Japanese audio.
We only supply
fresh Luxman UK stock. No imports here! You get the
full Luxman UK warrantee.
D-05 SACD/CD Player
The D-05 is a
high-grade D Series CD player designed to produce a quiet sound
field and reproduce acute sound. The D-05 was developed by
applying the know-how and technologies acquired while developing
the D Series with the original LxD TM drive mechanism, digital
circuits with higher model specifications equipped with high
sound quality DAC of surprising dynamic range, and analogue
circuits supported by the know-how to produce amplifiers.
Applicable disk 2-channel SACD, CD
Analog audio output 1 x unbalanced line, 1 x balanced line
Digital audio output 1 system for coaxial line,
1 system for optical line(TOS-LINK)
Digital audio input 1 system for coaxial line,
1 systems for optical line(TOS-LINK)
Output voltage/output impedance Unbalanced 2.5V/ 300Ω, balanced
2.5V/600Ω
Frequency response CD 5Hz–20kHz (–3.0dB) ,SACD 5Hz–50kHz
(–3.0dB)
Total harmonic distortion rate 0.0014% (for CD), 0.0017% (for
SACD)
S/N ratio 120dB (for CD) ,104dB (for SACD)
Power consumption 20W (Electrical Appliance and Material Safety
Law),1W (at standby)
Outside dimensions 440 (W) x 133 (H) x 410 (D) mm (terminals and
knobs excluded)
Weight 15.5kg
Click here to read the review
Our price £3,995.00
We will match any other price.
D-06 SACD/CD
Player
The D-06 is an
SACD/CD player exclusively for two-channel units, incorporating
innovative audio and digital technologies as well as new that
would later be adopted in the flagship D-08 model. The D-06’s
analogue circuits have given birth to new life for acoustic
sources, including many innovative units such as the original
LxD TM drive mechanism featuring high-precision reading ability
while producing both high rigidity and quietude,
high-sound-quality DAC with a surprisingly wide dynamic range of
up to 132 dB like the D-08, digital circuits adopting the
PCM1792A in a dual monaural composition, a power transformer
exclusive for audio circuits, and a fully balanced,
high-sound-quality buffer circuit.
Applicable disk 2-channel SACD, CD
Analog audio output 1 x unbalanced line, 1 x balanced line
Digital audio output 1 system for coaxial line,
1 system for optical line(TOS-LINK)
Digital audio input 1 system for coaxial line,
1 systems for optical line(TOS-LINK)
Output voltage/output impedance Unbalanced 2.5 V/300Ω,balanced
2.5 V/600Ω
Frequency response CD 5Hz–20kHz (–3.0dB) ,SACD 5Hz–50kHz
(–3.0dB)
Total harmonic distortion rate 0.0014% (for CD), 0.0017% (for
SACD/DSD),0.0007% (for SACD/PCM)
S/N ratio 124 dB (for CD), 104 dB (for SACD/DSD),20 dB (for
SACD/PCM)
Power consumption 24W (Electrical Appliance and Material Safety
Law) ,1W (at standby)
Outside dimensions 440 (W) x 133 (H) x 410 (D) mm (terminals and
knobs excluded)
Weight 15.5kg
Click here
to read the review
Our price £5,995.00
We will match any other price.
D-08 SACD/CD
Player
D-08 has finally
completed by introducing our know-how and technical breakthrough
to improve sound quality newly obtained in development of our
flagship model, the 1000 series amplifier, into all of 3
components, “Disk Drive, Digital Circuit, and Analogue Circuit"
that compose a digital player. We have newly developed our
original drive mechanism LxDTM* as the signal reading device
that is an essential component in a player. What is more, we
have embedded the latest TI-manufactured PCM1792A that provides
as much as 132dB (theoretical value) of tremendous dynamic range
into the digital section in a dual configuration. We have
adopted the analogue section equipped with fully discrete balanced
ODNF (Only Distortion Negative Feedback) that is a symbol of our
technology for pursing high quality sound into the digital
player for the first time. This product is a sound reproduction
system in the new area that pulls up sound information
thoroughly contained in software.
Applicable disk 2-channel SACD, CD
Analog audio output 1 x unbalanced line, 1 x balanced line
Digital audio output 1 system for coaxial line,
1 system for optical line
Digital audio input 1 system for coaxial line,
2 systems for optical line
Power consumption 30W (Electrical Appliance and Material Safety
Law)
Outside dimensions 440 (W) x 154 (H) x 413 (D) mm (terminals and
knobs excluded)
Weight 22.5kg
Our price £11,495.00
We will match any other price.
P-200 Compact Class A headphone
amplifier
New for 2010,
Luxman’s latest headphone amplifier has the ability to deliver
more of what is buried deep in your music, no matter the source.
The P-200 Headphone Amp is a pure Class-A circuit, giving the
listener that pure, natural sonic signature that can only
derived from a Class-A design. The P-200 is equipped with dual
inputs and both a standard 1/4” and a mini-plug output, so there
is no need for a signal-robbing adapter. The sonic signature of
the P-200 is clean and accurate, providing the perfect balance
of warmth and detail retrieval, while providing previously
unheard subtleties from even your most familiar recordings. A
huge success for Luxman!
Continuous power
output 2W+2W (8Ω)/1 W+1 W (16Ω)/500 mW+500 mW (32Ω)
Input sensitivity 1 V
Input impedance 47kΩ
Total harmonic distortion rate 0.015% (1kHz)
Frequency response 10Hz-100kHz (+0, -0.3dB)
Power consumption 16W (Electrical Appliance and Material Safety
Law)
Outside dimensions 64 (W) x 84 (H) x 257 (D) mm (terminals and
knobs excluded)
Weight 4.4kg
Our price £1,395.00
We will match any other price.
E-200 Phono Stage
Luxman’s E-200
phono stage is remarkable in its resolution as well as its
versatility and usefulness. Built to mate with any phono
cartridge, its three gain settings (up to 63dB) allow use with
any MM or MC cartridge. The E-200 has two inputs, is equipped
with both a mono switch for enjoyment of mono LPs as well as a
subsonic filter switch (30Hz cut) to take the pressure away form
your amp and woofers if you decide to get a little carried away
with the volume control! Most useful is the inclusion of a
front-panel activated cartridge demagnetiser to keep your MC
cartridge in tip-top shape at the push of a button. Eighty years
of legendary construction, great features, amazing sound
quality…what more can you ask for at this price? The Luxman
E-200 is a wonderfully musical piece of gear... hear it for
yourself and you'll be just as impressed as we are. In fact we
are left wondering why it's not at least £2,000+
Input Sensitivity:
MM: 4mV - MC high: 0.4mV - MC low: 0.18mV
Input Impedance: - MM: 47KΩ, - MC high: 40Ω - MC low: 2.5Ω
Gain: - MM: 36dB - MC high: 56dB - MC low: 63dB
Output/ Output Impedance: 250mV/300Ω
Circuit system: Built-in MC step up transformer, NF type
equalizer
Power consumption 4W (Electrical Appliance and Material Safety
Law)
Outside dimensions 364 (W) x 84 (H) x 257 (D) mm (terminals and
knobs excluded)
Weight 4.4kg
Our price £1,395.00
We will match any other price.
L505u 100W
The L-505 series
that has fascinated many music fans as a most affordable
high-class amplifier was reborn to a much-awaited ultimate
edition. The feedback circuit, ODNF, which is vital to sound
quality, was upgraded to the latest version of the high-class
specifications. L-505u has newly incorporated a pre/power
separation switch to adapt various system environments,
high-quality sound input selector IC that has been used in our
flagship model, C-1000f, and more. The music essence has
proceeded to the superior level along with sufficient power of
100W + 100W (8Ω). The champagne gold colour (limited edition) is
also available to coordinate with conventional models.
Continuous power
output 100W+100W (8Ω)/140W+140W (4Ω)
Input sensitivity/impedance PHONO (MM): 2.5mV/47kΩ,
PHONO (MC): 0.3mV/100Ω,
LINE: 180mV/42kΩ
Total harmonic distortion rate 0.005% or less (1kHz/8Ω),
0.03% or less (20Hz-20kHz/8Ω)
S/N ratio LINE: 105dB or more
Frequency response LINE: 20Hz-100kHz (+0, -3.0dB)
Power consumption 210W (Electrical Appliance and Material Safety
Law), 82W (under no signal), 1.2W (at standby)
Outside dimensions 467 (W) x 179 (H) x 437 (D) mm
Weight 21.0kg
Click here to read the review
Our price £3,295.00
We will match any other price.
L550A II 20W
Class A
L-550AII has been
organized with the developed tuning technique using
state-of-the-art circuits and carefully examined parts, and is
the second version of L-550A that features rich sound
reproducibility. In the amplification section, ODNF version 2.2A
that is a customized version of the original ODNF to the pure
class A amplification method with 20W + 20W (8Ω) has been
adopted. We have refined sound quality with L-550AII resulting
from thoroughly reviewing details such as positive adoption of
new parts along with inheriting mellow and densified sound.
L-550AII is a basic model of a integrated amplifier with pure
class A amplification method, which allows you to absorbedly
enjoy music time. We love this Class A amplifier to bits and our
MD uses one in his personal system!
In the typical
Japanese way of underestimate, this amplifier actually produces
78 watts per channel into 8 ohms according to the lab
measurements performed by Hi Fi World. Read the review below?
Continuous power output 20W+20W (8Ω)/40W+40W (4Ω)
Input sensitivity/impedance PHONO (MM): 2.5mV/47kΩ,
PHONO (MC): 0.3mV/100Ω,
LINE: 180mV/42kΩ
Total harmonic distortion rate 0.006% or less (1kHz/8Ω),
0.03% or less (20Hz-20kHz/8Ω)
S/N ratio LINE: 106dB or more
Frequency response LINE: 20Hz-100kHz (+0, -3.0dB)
Power consumption 190W (Electrical Appliance and Material Safety
Law), 190W (under no signal), 1.2W (at standby)
Outside dimensions 467 (W) x 179 (H) x 437 (D) mm
Weight 22.0kg
Click here to read the review
Click here for
the Hi Fi World rave review!
Our price £3,595.00
We will match any other price.
L507u 110W
The L-507u is a
mid-range model delivering ample power of 200W rated output at
4Ω load. It is equipped with the upgraded ODNF version 3.0 as
mainstay of the amplification section which governs sound
quality. Low impedance achieved by error detection circuits has
resulted in a greatly reduced distortion rate and improved
signal-to-noise ratio, and the capacity to maintain a high
initial slew rate – all of these characteristics work together
to create a powerful and sophisticated musical portrait. With
its built-in separation switch for separation of pre-amplifier
and power sections, it is possible to add a power amplifier for
bi-amplification and use the unit in combination with an AV
system. True to its high-end image, the L-507u offers many
attractive features such as copper alloy terminals, large size
speaker terminals, and a hairline-finished aluminium top panel.
Continuous power
output 110W+110W (8Ω)/200W+200W (4Ω)
Input sensitivity/
input impedance PHONO (MM): 2.5 mV/47 kΩ,
PHONO (MC) :0.3 mV/100 Ω,
LINE :180mV/42 kΩ
Total harmonic distortion rate 0.004% or less (1 kHz/8Ω),
0.03% or less (20 Hz-20 kHz/8Ω)
S/N ratio LINE:107dB or more
Frequency response LINE: 20Hz-100kHz (+0,-0.3dB)
Power consumption 250W (Electrical Appliance and Material Safety
Law), 84W (under no signal), 1.2W (at standby)
Outside dimensions 467 (W) x 179 (H) x 430 (D) mm
Weight 22.5kg
Click here
to read the review
Our price £4,795.00
We will match any other price.
L590A II 30W Class A
We have reviewed
L-590A, the memorial model for 80th anniversary of our
foundation, from its basic performance, refined it, and finally
developed the second version, that is L-590AII. The separation
performance has attained to the level of high-end models by
carefully examining all the circuits including introduction of
the pure class A operation with 30W + 30W (8Ω) to acquire
condensed sound reproducibility and the high sound quality
selector switch IC used in the top-end control amplifier,
C-1000f. L-590AII is a top-end model of our integrated amplifier
with pure class A amplification method, which is refined to the
details by increasingly pursuing strong drive force and
open sound.
Continuous power output 30W+30W (8Ω)/60W+60W (4Ω)
Input sensitivity/impedance PHONO (MM): 2.5mV/47kΩ,
PHONO (MC): 0.3mV/100Ω,
LINE: 180mV/42kΩ
Total harmonic distortion rate 0.005% or less (1kHz/8Ω),
0.03% or less (20Hz-20kHz/8Ω)
S/N ratio LINE: 107dB or more
Frequency response LINE: 20Hz-100kHz (+0, -3.0dB)
Power consumption 280W (Electrical Appliance and Material Safety
Law), 280W (under no signal), 1.2W (at standby)
Outside dimensions 467 (W) x 178 (H) x 434 (D) mm
Weight 26.5kg
Click here to read the review
Our price £6,495.00
We will match any other price.
L509u 120W
One package
consists of complete pre-amplifier and complete power-amplifier,
which is an ultimate edition model, L-509u, resulting from
seeking our principle, "One Body Separation" to the extreme
level. The fully manualized amplifier without any electronic
circuit such as microprocessor allows you to enjoy massive
operability and has achieved intrinsic beauty as an audio
device. L-509u is equipped with the pre-amplification circuit
that transmits input signals with optimal impedance, the output
circuit that drives a wide variety of speakers in a flexible
manner, and strong power supply. This amplifier provides a
separate grade in all stages, and is now close to the ideal of
an integrated amplifier without the excuse of being
multifunctional.
Continuous power
output 120W+120W (8Ω)/240W+240W (4Ω)
Input sensitivity/impedance PHONO (MM): 2.5mV/47kΩ,
PHONO (MC): 0.3mV/100Ω,
LINE: 193mV/55kΩ
Total harmonic distortion rate 0.003% or less (1kHz/8Ω),
0.03% or less (20Hz-20kHz/8Ω)
S/N ratio LINE: 107dB or more
Frequency response LINE: 20Hz-100kHz (+0, -3.0dB)
Power consumption 330W (Electrical Appliance and Material Safety
Law), 85W (under no signal)
Outside dimensions 467 (W) x 179 (H) x 428 (D) mm
Weight 27.5kg
Click here to read the review
Our price £7,495.00
We will match any other price.
C-600f Control Amplifier
We are pleased to
announce the hoped-for debut of the 600 series as a new member
of the separate amplifiers starting from the 1000 series that is
a memorial model for 80th anniversary of our foundation. C-600f
is equipped with 2 pieces of "LECUA1000-WM", the integral system
in which the innovative feedback circuit, ODNF version 2.4, and
the sound volume attenuator are directly connected in the full
mono-block type as the same as its upper model, C-800f.
Especially because C-600f is placed in the pre-section where
tiny sound signals are processed, we have selected a method that
causes the least deterioration in sound quality. All of the
various functions suited for the system control center such as
phase switching of tone control and balance input/output and
selection of balance/unbalance output can be viewed on an FL
display with a high level of visibility and operated in a
centralized manner with a dedicated remote control.
Input sensitivity / Input impedance unbalance / 300mV / 47.5kΩ,
balance / 300mV / 67.5kΩ
Output / Output impedance unbalance / rating 1V / 564Ω Maximum
5.8V,
balance / rating 1V / 600Ω Maximum 6.2V,
Total harmonic distortion rate unbalance / 0.009% (20Hz-20kHz),
balance / 0.018% (20Hz-20kHz),
Frequency response 20Hz-20kHz (+0, -0.1dB),
5Hz-116kHz (+0, -3.0dB)
S/N ratio unbalance / 123dB (IHF-A),
balance / 120dB (IHF-A)
Power consumption 21W (Electrical Appliance and Material Safety
Law), 2.3W (at standby)
Outside dimensions 440 (W) x 117 (H) x 407 (D) mm
Weight 13.0kg
Click here
to read the review
Our price £5,995.00
We will match any other price.
C-800F Control Amplifier
We have acquired a
great number of technologies for improvement of sound quality
through the development of our flagship model, C-1000f. Such
technologies have been integrated into newly appeared C-800f, a
masterpiece of control amplifier. Our original feedback circuit,
ODNF, is introduced into C-800f, which is version 2.4 as the
same as used in C-1000f. In the attenuator section that is
integrated into the amplification circuit, 4 pieces of
"LECUA1000-WM" that has been newly developed for improved
efficiency with the signal path are mounted. Various gorgeous
specifications are inherited from our flagship model including
full-balanced transmission circuit, power supply equipped with
current supply source comparable to a power amplifier, and
bi-amplification output mode. C-800f can fully exercises its
unlimited dynamism and richness of music essence when a
high-performance power amplifier such as M-800A is driven
Input sensitivity /
Input impedance unbalance / 300mV / 47.5kΩ,
balance / 300mV / 95.0kΩ
Output / Output impedance unbalance / rating 1V / 564Ω Maximum
5.5V,
balance / rating 1V / 1128Ω Maximum 11V,
Total harmonic distortion rate unbalance / 0.009% (20Hz-20kHz),
balance / 0.005% (20Hz-20kHz),
Frequency response 5Hz-20kHz (+0, -0.1dB),
1Hz-117kHz (+0, -3.0dB)
S/N ratio unbalance / 123dB (IHF-A),
balance / 126dB (IHF-A)
Power consumption 24W (Electrical Appliance and Material Safety
Law), 2.3W (at standby)
Outside dimensions 440 (W) x 117 (H) x 427 (D) mm
Weight 17.6kg
Click here to read the review
Our price £11,495.00
We will match any other price.
C-1000f Control
Amplifier
As an ultimate "Power Amplifier Driver" -
C-1000f, a memorial model for 80th anniversary of our
foundation, has achieved "Dynamism, Delicacy, and Richness" that
is the same idea and philosophy as those of B-1000f at a higher
order. We have newly developed "LECUA1000", computerized
attenuator directly connected to the ODNF (version 2.4)
amplifier for the volume block that is the most important
component in all the circuit elements because C-1000f is the
most sophisticated control amplifier. The attenuator,
exclusively used for line level, contributes to the achievement
of incomparable transmission quality. C-1000f is our new
flagship model that exercises its highest performance in
combination with B-1000f.
Input sensitivity / Input impedance unbalance / 334mV / 50kΩ,
balance / 334mV / 100kΩ
Output / Output impedance unbalance / rating 1V / 510Ω Maximum
4.1V,
balance / rating 1V / 1020Ω Maximum 8.2V,
Total harmonic distortion rate unbalance / 0.001% (20Hz-20kHz),
balance / 0.0007% (20Hz-20kHz),
Frequency response 5Hz-20kHz (+0, -0.1dB),
1Hz-118kHz (+0, -3.0dB)
S/N ratio unbalance / 124dB (1kHz(IHF-A) ),
balance / 127dB (1kHz(IHF-A) )
Power consumption 28W (Electrical Appliance and Material Safety
Law), 2.3W (at standby)
Outside dimensions 440 (W) x 117 (H) x 429 (D) mm
Weight 23.0kg
Click here
to read the review
Our price £22,950.00
We will match any other price.
M-600A 30W Class
A Amplifier
We are pleased to announce the hoped-for debut of the 600 series
as a new member of the separate amplifiers starting from the
1000 series that is a memorial model for 80th anniversary of our
foundation. M-600A has inherited the power block configuration
whose high sound quality output module with the unit of
4-parallel elements is the final stage created in the process of
developing B-1000f and also inherited strong power supply
environment where a large-scale EI type power transformer is
located at the centre resulting in achievement of complete
output linearity from 30W (8Ω) to 120W (2Ω), the maximum output.
Flexible drivability for a wide variety of speaker systems is
ready including an ability to handle tremendous power of up to
240W (4Ω) at BLT connection. Adoption of the innovative feedback
circuit, ODNF version 2.3A of the pure class A specification,
into the amplification section allows you to enjoy rich and
unconstrained sound to your heart's content. This feedback
circuit is also integrated into its upper model, M-800A. * The
specifications above are valid at the time of product
announcement.
Continuous power output 30W+30W (8Ω)/at stereo,
60W+60W (4Ω)/at stereo,
120W (8Ω)/at monaural
Maximum output 240W+240W (1Ω)/at stereo,
480W (2Ω)/at monaural
Input sensitivity 550mV/30W (8Ω)
Input impedance unbalance/51kΩ, balance/67kΩ
Total harmonic distortion rate 0.009% or less (1kHz/8Ω),
0.1% or less (20Hz-20kHz/8Ω)
Frequency response 20Hz-20kHz (+0, -0.2dB),
DC-130kHz (+0, -3.0dB)
S/N ratio 114dB (IHF-A)
Power consumption 290W (Electrical Appliance and Material Safety
Law), 290W (under no signal), 3.8W (at standby)
Outside dimensions 440 (W) x 189 (H) x 420 (D) mm
Weight 26.5kg
Click here to read the review
Our price £5,995.00
We will match any other price.
M-800A 60W Class
A Amplifier
A lot of fresh know-how to improve sound quality has been found
during plenty of time to develop the monaural power amplifier,
B-1000f, a memorial model for 80th anniversary of our
foundation. It is the stereo power amplifier, M-800A, with pure
class A amplification method that high quality of music essence
from B-1000f is achieved using a stereo package by applying the
technological breakthroughs induced by superior products with
boldness to meet customers' requests. Overwhelming output
linearity is achieved thanks to the angular type transformer
with flatwise coil that delivers tremendous regulation
performance and also thanks to the ODNF (version 2.3A) power
block of 4x2 structure with pure class A amplification method
that generates mellow sound resulting in gaining customers'
supports. Accordingly, all the speaker systems from 60W/8Ω to
480W/1Ω (momentary maximum) can be smoothly and powerfully
driven.
Continuous power output 60 W+60W (8Ω)/at stereo,
120W+120W (4Ω)/at stereo,
240W (8Ω)/at monaural
Maximum output 480 W+480W (1Ω)/at stereo, 960W (2Ω)/at monaural
Input sensitivity 773mV/60W (8Ω)
Input impedance unbalance/51 kΩ, balance/67kΩ
Total harmonic distortion rate 0.009% or less (1kHz/8Ω),
0.1% or less (20Hz-20kHz/8Ω)
Frequency response 20Hz-20kHz (+0, -0.1dB), DC-130kHz (+0,
-3.0dB)
S/N ratio 117dB (IHF-A)
Power consumption 492W (Electrical Appliance and Material Safety
Law), 396W (under no signal), 0.9W (at standby)
Outside dimensions 440 (W) x 224 (H) x 485 (D) mm
Weight 48.5kg
Click here to read the review
Our price £11,495.00
We will match any other price.
B-1000f 250W Amplifier
"Expressionist" - This is the one that has the extraordinary
ability to give people impressive presentation. B-1000f that has
been developed as a memorial model for 80th anniversary of our
foundation is equipped with the super regulation transformer on
which a flat-type copper coil is mounted uncovered and can
provide enormous output of 2000 watts/1 ohm (momentary maximum)
capable of responding to all types of speaker loads in order to
express all of "Dynamism", "Delicacy", and "Richness" in a
superior level. We have developed 4x4 structured ODNF version
2.3 that consists of 4 modules of 3-stage Darlington 4-parallel
push-pull output circuit as a feedback circuit for high quality
sound. B1000f is our flagship model that has been accomplished
by pursuing ultimate quality with our know-how and large amount
of resources and by eliminating compromise at all for
improvement of sound quality as a result of comprehensively
compiling commitment to "Sound" and technologies for as long as
80 years.
Continuous power output 250W (8Ω)/500W (4Ω)
Maximum output 1,000W (2Ω)/2,000W (1Ω)
Input sensitivity 1 V/250W (8Ω)
Input impedance unbalance/51kΩ, balance/67kΩ
Total harmonic distortion rate 0.007%/1kHz 250W (8Ω)
Frequency response DC-150kHz (+0, -3.0dB)
S/N ratio 118dB (IHF-A)
Power consumption 439W (Electrical Appliance and Material Safety
Law), 232W (under no signal), 0.7W (at standby)
Outside dimensions 428 (W) x 295 (H) x 592 (D) mm
Weight 64.0kg
Click here to read the review
Our price £22,950.00
We will match any other price.
Prices correct at
26 December 2011 |
